About Red Dot

Red Dot designs and builds premium climate control components, integrated systems, replacement parts, and aftermarket units for vehicles in demanding work environments all over the world. 

Based in Seattle, Red Dot has more than 400 employees in the United States, Europe, Mexico, and China, and more than 175 aftermarket distributor locations in North America. 

Headquarters:

Red Dot Corp.
495 Andover Park E.
Seattle WA 98188
USA

+1-206-575-3840
www.reddotcorp.com

Company Contact:

Robert Gardiner, Marketing Manager
206-574-6575

Key Executives

Randy Gardiner, President/CEO
Bruce Channer, Vice President/CFO
Gary Hansen, Vice President
Stephen Machin, Vice President

Markets Served

Trucking
Construction
Defense
Agriculture
Bus and coach
Mining
Crash/fire/rescue

Search This Site
Categories
Media Contact

Stephen Petit
SiefkesPetit Communications

+1-425-392-2611 office
+1-425-443-8976 mobile

RSS Feed
Red Dot on Flickr
« Red Dot Names Robert Gardiner National Sales Manager, Aftermarket | Main | How to Choose the Right A/C Fitting »
Wednesday
Jan192011

Change the Air Filter, Check the Evaporator

If it’s time to change recirc air filters in your cab, go a little further and check the evaporator for caked-on dirt that can hamper its performance. 

During normal operation, the evaporator picks up moisture from the air which condenses on the fins as water droplets before draining out of the system. This dehumidification action helps make the operator feel more comfortable in the cab. 

The downside is that moisture on the fins attracts dust. We see this a lot on backhoes, skid steers, and other equipment where the operator runs the A/C with the window open so he can communicate with a coworker on the ground.

Most filters for recirculated air are the low-restriction type. They aren’t designed to remove large amounts of dust from the air before it reaches the evaporator. Next time you change the filter (following recommended inspection intervals), check the evaporator. It may need a good cleaning to make sure the operator is getting the steady stream of cool air he expects.